Tomix KoKi 102/103 conversion

> main > modeller's corner > couplers > Tomix > container wagons

Tomix container cars (Koki 102/103) ref. 92135
Conversion by Phil Hendry
MT coupler used: MT #1015
TN coupler used: Tomix  0391
Skill level: Easy

The Tomix Koki 102/103's come in a set of four. This conversion can also be applied to other Tomix container cars and seems even be applicable to all other Tomix freight cars, except for the 4-wheelers.

Mr. Hendry used the Tomix TN couplers as a semi-permanent coupler between the cars within the set, and he fitted the MT's only on the outer ends of the 4-car set. For a 4-car set you need 3  pairs of TN couplers. Fit these following the Tomix instructions, included in the packaging. Then assemble the MT #1015 couplers following the MT instructions, included in the packaging or from the Micro Trains handbook, where there's a larger sheet with the instructions, this is a lot easier to read.
Cut off the coupler pocket from the bogie frame, near the bolster is the best place. Then glue the assembled MT couplers under the bottom of the container car, at the handrail end for a 4-car set. Use 2-component epoxy, a gel-type superglue or a good strong impact adhesive, like Bostik
Of course, you can mount MT couplers between all cars if you want.

Modelling Layouts Modeller's Corner Train Simulators Various